• Trang Chủ | Sản phẩm

Products

We Are The Best In The Industry

3-Phase Surge Protection Device 80kA/phase

  • Three-phase surge protection device, 80kA/phase; 40kA/mode.
  • Measured Limiting Voltage (MLV): 27V (L-N) @ A1 Ring Wave 2kV, 67A, suitable for protecting sensitive electrical equipment, electronic devices, and control systems.

Product code: TK-LP080-3Y380-FL

Origin: Made in U.S.A

Guarantee: 3-Year Unlimited Free Replacement

Category:

Policy & Commitment

3-year warranty
24/7 technical support
Free technical consultation and installation
Nationwide delivery
Product description

The LowProfile LP080 Three-phase surge protection device is a Type 1 SPD certified to UL 1449 standards, capable of handling a maximum surge current of up to 80kA/phase; 40kA/mode. It is ideally suited for protecting distribution panels, branch panels, extra low voltage panels and critical loads.

The device is equipped with an Enhanced Transient Filter (ETF) that effectively suppresses lightning surges and transient overvoltages generated on the power network, helping extend equipment lifespan and improve overall system reliability.

LowProfile LP080 provides reliable protection against transient overvoltages caused by direct lightning strikes on power lines as well as electrical disturbances from the utility grid.

Key Features of the LowProfile LP080 Surge Protection Device:

  • Certified to UL 1449 Type 1 standard.
  • Maximum rated surge current (Imax): 80kA/phase; 40kA/mode
  • Measured Limiting Voltage (MLV): 27V (L-N) @ 2kV, 67A
  • Integrated Enhanced Transient Filter (ETF) for effective surge suppression
  • Response Time: < 1 nanosecond
  • Short-Circuit Current Rating (SCCR): 200kAIC

The LowProfile LP080 surge protection device is equipped with integrated Component Level Fusing (CLF), allowing direct installation into the electrical system without the need for a separate disconnect device, while still ensuring maximum safety for the electrical system during operation.

APPLICATIONS:

  • Compliant with ANSI/IEEE C62.41 Categories C, B, and A.
  • Suitable for protecting distribution panels, branch panels, extra low voltage panels and critical loads.
  • Effective against high-energy lightning surges and common “ring-wave” transients.
  • Compact design allows installation inside electrical panels, minimizing conductor length and significantly reducing residual voltage.

TECHNICAL SPECIFICATIONS:

  • Function: Surge protection and surge suppression.
  • System configuration: 3 Phase, 4 wires + Ground.
  • System voltage: 220/380VAC.
  • Device type: Type 1 according to UL 1449.
  • Connection: Parallel installation with the electrical system.
  • Maximum Continuous Operating Voltage (MCOV): 320V (L-N; L-G; N-G), 640V (L-L).
  • Maximum Rated Surge Current (Imax): 80kA/phase; 40kA/mode.
  • Enhanced Transient Filter (ETF).
  • Integrated Component Level Fusing (CLF).
  • Protection Modes: All modes (L-N, L-L, L-G, N-G).
  • Response Time: < 1 nanosecond.
  • Measured Limiting Voltage (MLV): 27V (L-N) (A1 Ring Wave 2kV, 67A).
  • Voltage Suppression Technology: Maintains a pure sine wave for the electrical system.
  • EMI/RFI Noise Filtering: 1kHz @ 1dB; 10kHz @ 14dB; 100kHz @ 42dB; 1MHz @ 22dB; 10MHz @ 6dB; 100MHz @ 2dB; Max. Attenuation Frequency 57dB @ 142kHz.
  • Short Circuit Current Rating (SCCR): 200kAIC.
  • Status indicator lights; Form C dry relay contacts for suppressor status; Audible alarm with silence button
  • Operating Environment: -40°C to 70°C; 5% to 95% non-condensing humidity.
  • Enclosure: NEMA 1.
  • Standards Compliance: UL 1449 5th Edition, Type 1 for Type 1 & Type 2 locations; UL 1283; ANSI/IEEE C62.41 & C62.45.
Chat Messenger Chat Zalo Gọi hotline